Supermicro CSE-826BE26-R1K28WB 2U 12-Bay X9DRW-iF 2x LGA2011 SAS2-826EL2 Server

Supermicro CSE-826BE26-R1K28WB 2U 12-Bay X9DRW-iF 2x LGA2011 SAS2-826EL2 Server

Supermicro CSE-826BE26-R1K28WB 2U 12-Bay X9DRW-iF 2x LGA2011 BPN-SAS2-826EL2 Server Barebone

Condition: Off-lease equipment. Clean and tested by qualified technician. Sold as pictured, no other accessories are included. 12x 3.5" and 2x 2.5" HDD trays and screws are included.

Please note: This basic configuration does not include CPUs/Memory/RAID Controller or rackmount rail kit.

(Custom CPU/Memory configurations are available for an additional cost. Please contact us for a quote or if you have questions regarding current configuration.)

Specifications:

Form Factor:

• Supermicro CSE-826BE26-R1K28WB 12x 3.5" Drive Bays 2U rackmount chassis

Installed Motherboard:

• X9DRW-iF
• Support Dual Socket R (LGA 2011)
  
  Intel® Xeon® processor E5-2600
  
  and E5-2600 v2 family
  
  (up to 135W TDP **)
• 16x 240-pin DDR3 DIMM slots
• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Renesas SH7757 BMC
• Intel® i350 Dual Port Gigabit Ethernet
• Riser card support:
  
  Left side - 1 PCI-E 3.0 (x32)
  
  Right side - 1 PCI-E 3.0 (x16)

Installed RAID Controller:

• NONE

Chassis Expansion Slots:

• 4 full-height & half-length expansion slot(s)

Drive Bays:

• 12x 3.5" FRONT and 2x 2.5" REAR drive bays with HDD Hot-swap trays, SAS HDD and Enterprise SATA HDD recommended.
  
  Supermicro BPN-SAS2-826EL2 (front) SAS2 Dual Expander Backplane.

Front Panel:

• Buttons: Power On/Off, System Reset buttons.
  
  LEDs: Power, HDD, Network activity, System Overheat, & Power Fail LEDs.

System Cooling:

• Three 80mm x 38mm hot-swap middle cooling fans
  
  Support redundant cooling function

Power Supply:

• 2x Redundant (1+1) 1280W AC-DC power supply with PMBus
  
  High-efficiency with 80 PLUS Platinum Certified

Custom CPU/Memory configurations are available. Please contact us for a quote or if you have questions regarding current configuration.