NEW Exablaze ExaNIC X10-GM PTP Grandmaster and Ultra Low Latency 10GbE PCIe NIC
91730NEW Exablaze ExaNIC X10-GM PTP Grandmaster and Ultra Low Latency 10GbE PCIe NIC
NEW Exablaze ExaNIC X10-GM PTP Grandmaster and Ultra Low Latency 10GbE PCIe NIC
NEW Exablaze ExaNIC X10 PTP Grandmaster and Dual-Port Ultra Low Latency 10GbE PCI-E 3.0 NIC Network Interface Card
EXABLAZE P/N: EXANICX10-GM
Tranceiver: Not included
Condition: New
Both full height and low profile SFF mounting brackets are included.
90-Day Warranty!
Manufacturer's descriptions:
Dual port IEEE1588 PTP Grandmaster Time Synchronization solution
High-performance GPS-based PTP GM in a half-height NIC form factor
The Exablaze's ExaNIC X10-GM Time Synchronization NIC is a unique grandmaster and low latency network card solution. It packages an entire GPS-based Precision Time Protocol (PTP) grandmaster into a tiny, half-height, half-length network-card form factor. This allows users to save on rack space without compromising on features. The onboard GPS receiver provides time synchronization to a UTC of 60ns. The adapter also provides PPS and 10MHz output and can be used to synchronize the host-system clock to the GPS reference.
High-stability holdover
An onboard high-stability oscillator results in a holdover of better than 15us over 24 hours.
During times when GPS reception has failed, the ExaNIC X10-GM Time Synchronization NIC will automatically revert to using its onboard high-precision OCXO oscillator as a holdover time reference until the GPS lock is restored. For applications demanding exceptional holdover accuracy, a miniature atomic clock upgrade is also available.
Simple yet powerful
The software runs on your host, allowing the GM to run as an “appliance.”
The ExaNIC X10-GM Time Synchronization NIC is bundled with open-source configuration and management software. The software runs on any Linux host. This allows users to set the operating conditions for the ExaNIC X10-GM NIC; the adapter can also be used to show running status information (for example, the number of connected slaves, the GPS lock, the number of satellites in view, etc.).
Despite using host-based configuration tools, the ExaNIC X10-GM Time Synchronization NIC handles all PTP operations internally. This eliminates any need for the host at runtime. The ExaNIC X10-GM Time Synchronization NIC will power-up and immediately begin serving time using the last saved configuration, even if the host operating system fails to start. This ensures always on operation, even under host-failure conditions.
GPS-locked packet capture and timestamping
Built-in timestamping records frame arrivals, using a GPS-disciplined clock, to a granularity of 4ns.
These timestamps are available through a direct access API (libexanic), through a transparent TCP/UDP acceleration library (exasock), and to the kernel. Standard utilities such as tcpdump can make use of these hardware timestamps. You can also acquire our open-source high rate capture application called Exact Capture for demanding capture requirements.
IEEE 1588v2 GM
- 2x SFP+ ports
- Hardware accelerated PTP Grandmaster (Port 0 only)
- Each port configurable to 10G, 1G or 100M
- IPv4 and PTP Ethertype operation
- Unicast and multicast operation
- Up to 128 unicast slaves
- Telecom profile
- Default profile
GNSS receiver
- GPS, GLONASS, QZSS, and BeiDou
- 72 channels
- Internal timesync accuracy: 30ns RMS
- Receiver sensitivity: 167dBm
- Active antenna support (3.3V)
- Cold-start acquisition <30s
- Tunable antenna delay
High-precision oscillator
OCXO:
- 24 hour holdover, <15us
- 0.2ppb temperature stability
- Allen variance: 1 x10-11
AUX INPUT/OUTPUT
- 1 PPS @ 3.3V
- 10MHz @ 3.3V
- Can be configured for PPS in
General
Form factor:
- Low-profile PCI Express Card
- 150x68mm (5.91x2.67in)
Environmental:
- Operating temperature: 0 °C to 55 °C
- Storage temperature: -40 °C to 70 °C
- Operating Relative Humidity: 5% to 90% (non-condensing)
- Storage Relative Humidity: 5% to 95% (non-condensing)
Connectors:
- 2x SFP+
- SMA for GPS Antenna Connector
- SMA for PPS in/out
Data rates:
- 10GbE, 1GbE, 100M Fast Ethernet
Supported media:
- Fiber (10GBASE-SR, 10GBASE-LR, 1000BASE-SX), SFP+ Direct Attach
Host interface:
- PCIe x8 Gen 3 @ 8.0 GT/s per lane
Operating systems:
- Linux x86_64 (all distributions)
Timestamping
Timestamp resolution:
- 4 ns
Timestamp availability:
- All received frames, most recent transmitted frame