Silicom PE210G2I40-T-TN Dual Port 10GBase-T RJ45 PCIe2 x8 NIC Intel X540-T2 SFF
90409Silicom PE210G2I40-T-TN Dual Port 10GBase-T RJ45 PCIe2 x8 NIC Intel X540-T2 SFF
Silicom PE210G2I40-T-TN Dual Port 10GBase-T RJ45 PCIe2 x8 NIC Intel X540-T2 SFF
Silicom PE210G2I40-T-TN Dual Port 10GBase-T RJ45 PCI-E 2.1 x8 Ethernet Adapter Card NIC Intel X540 Based with Low Profile, SFF Mounting Bracket
SILICOM P/N: PE210G2I40-T-TN
Mounting bracket: Low profile, SFF mounting bracket
Condition: Clean, tested pull - Guaranteed 100% working!
No software, cables or other accessories included. Comes with low profile, SFF mounting bracket only.
30-Day Warranty!
Manufacturer's description and specifications:
Dual Port Copper 10 Gigabit Ethernet PCI Express Server Adapter Intel® x540 Based
Copper 10 Gigabit Ethernet 10GBASE-T :
- Integrated 10 Gigabit Copper PHY supports 10GBASE-T, 1000 BASE- T and 100BASE- TX
- Triple speed 10Gbps (10GBase-T), 1000Mbps (1000Base-T) and 100 Mbps (100Base-Tx)
- RJ-45 connector supports CAT 6A cable
Performance Features:
- Support for jumbo frame up to 15.5KB
- Flow control support
- Statistics management and RMON
- 802.1q VLAN support
- TCP segmentation offload: up to 256KB
- IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload
- Fragmented UDP checksum offload for Packet Reassembly
- Message Signal interrupts ( MSI)
- Message Signal interrupts ( MSI-X)
- Interrupt throttling control to limit maximum interrupt rate and improve CPU usage
- Multiple Receive Queues ( RSs) 8x8 & 16x4
- 32 Transmit queues
- Support for 16 Virtual Device Queues ( VMDq) per port
- Support Direct Cache Access ( DCA)
- Large on chip receive packet buffer (384 KB)
- Large on chip transmit packet buffer ( 160KB)
Host Interface:
- PCI Express X8 lanes
- Support PCI Express Base Specification 2.1 (5GT/s)
10GBASE-T Copper Ethernet Adapters Technical Specifications: | |
| IEEE Standard / Network topology: | Copper 10Gigabit Ethernet, 10GBASE-T, IEEE 802.3an Gigabit Ethernet, 1000Base-T 100 Mb Ethernet: 100BASE- TX |
| Data Transfer Rate: | 20 Gb/s, 2000Mb/s and 200 Mb/s in full duplex mode per port |
| Cables and Operating distance: | 100Base-Tx Category 5 maximum 100m 1000Base-T Category 5E maximum 100m 10GBase-T Category 6A maximum 100m |
Operating Systems Support | |
| Operating system support: | Windows Linux |
General Technical Specifications | |
| Interface Standard: | PCI-Express Base Specification Revision 2.1 (5GT/s) |
| Board Size: | Low profile add-in card: 152.4mm X 68.91mm (6.0”X 2.713”) |
| PCI Express Card Type: | X8 Lane |
| PCI Express Voltage: | +12V +- 8% |
| PCI Connector: | Gold Finger: X8 Lane |
| Controller: | Intel x540 |
| I/O: | RJ45 |
| Weight: | 130g |
| Power Consumption: | 14.28 W, 1.19 A at 12V: Typical all ports operate at 10Gb/s, (Normal Mode). 7.92 W, 0.66 A at 12V: Typical all ports operate at 1Gb/s, (Normal Mode). 5.04 W, 0.42 A at 12V: Typical all ports operate at 100Mb/s, (Normal Mode). 7.26 W, 0.605 A at 12V: Typical No link at all ports |
| Operating Humidity: | 0%–90%, non-condensing |
| Operating Temperature: | 0°C – 45°C (32°F – 113°F) |
| Storage: | -40°C–65°C (-40°F–149°F) |
| EMC Certifications: | FCC Part 15, Subpart B Class A Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class A Amendments A1: 2000; A2: 2003 Conducted Emissions Radiated Emissions CE EN 55024: 1998 Amendments A1: 2000; A2: 2003 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000, Class A Harmonic Current Emissions CE EN 61000 3-3 1995, Amendment A1: 2001 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per |
| MTBF*: | 177 (Years) *According to Telcordia SR-332 Issue 1 Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature - 25°C. Temperature rise of 10°C above the system ambient temperature was assumed for the cards components |
LEDs | |
| LEDs: | (2) LED per port Speed LED: Link of 1Gb/s: Turns on link (yellow) Link of 10Gb/s: Turns on link (green) Link /ACT LED : Turns on link , blinks on activity (green) |
| LEDs location: | LEDs are located in the RJ45 connector port |
| Connectors: | (2) Shielded RJ-45 |